Call 0415501772 Monday-Friday 8:30am-4:30pm

0415 501 772

info@jgirrigation.online

Online Store Always Open

Hunter X-Core Controller XC-801-A (Corded) With 25mm Valves

Hunter X-Core Outdoor Irrigation Controller

This entry-level residential controller offers simple operation with “smart” Solar Sync compatibility. With easy-to-configure control for up to 8 stations, including 3 programs and 4 start times each, the X-Core is the perfect solution for residential applications. Plug in the revolutionary Solar Sync ET sensor and the X-Core is converted into a “smart controller,” that regulates irrigation run times based on locally measured weather. X-Core is also compatible with Hunter remotes for quick, wireless activation of irrigation. Installation, operation, and maintenance are designed to be simple while still delivering optimal efficiency or reliability.
  • Type: Fixed
  • Enclosures: Indoor and outdoor
  • Independent programs: 3
  • Start times per program: 4
  • Max. station run time: 4 hrs
  • Warranty period: 2 years
A manual backup utility that stores complete controller scheduling and setup information in backup memory. This allows the saved watering schedule to be restored at any time. This can be used to set a controller back to its initial settings after tampering or at the beginning of a new season. The Programmable Rain Delay feature incorporates a user specified number of days to keep the controller in the OFF mode, then allows for the system to automatically revert back to scheduled irrigation. This will prevent watering during an extended period of inclement weather but will resume watering automatically without requiring a return visit to the controller. The controller displays the number of days remaining before watering resumes. Electrical Specifications
  • Transformer input: 240 VAC
  • Transformer output (24 VAC): 1 A
  • Station output (24 VAC): 0.56 A
  • Pump/master valve (24 VAC): 0.28 A
  • Sensor inputs: 1
NON-VOLATILE MEMORY
This feature offers protection against unreliable power, retaining current time, date, and program data. Users can program a delay between stations as the controller advances from one station to the next. This delay can range from a few seconds (to permit slow-closing valves additional time to close) to a much longer period of time (to allow pressure tanks time to recharge), based on user requirements.

Hunter PGV101GB 25mm Solenoid Valve 24 Volt

Hunter has a range of professional-grade valves designed to handle the full range of landscape needs.The PGV is a hard working, heavy-duty solenoid valve offering you the best features of a top-of-the-line valve…more than enough to handle the rigors of whatever your site has to offer. For smaller landscape applications, the PGV101 is available in 1″ female-female BSP configuration. Inlet diameter: 25mm (1″ BSP) Height: 13cm Length: 11cm Width: 6cm Flow rate: 0.7 to 150 l/min
Shopping Cart